CALL OR TEXT US TODAY AT (913) 780-0381
Why Choose AMGutters?
Lenexa, Kansas
Gutters are just Gutters, right?
Absolutely not. Like anything else, there are ways to make things cheaper, guttering is no exception. There are different manufacturers for guttering products, and there are dozens of different accessories. Many gutter companies use what I call "cheap cuts". They practice low cost and high volume, guess who loses? You do.
We could buy the cheapest gutter hanger, deck or drywall screws, cheap sealant, not use downspout outlets, and buy the cheapest material in Kansas City, but we don't. Most of my business is from referrals because we do things right, and we put on a product that will last and protect your home for the long term.
Our Installation Services
- Residential, commercial, and multi-family
- Complete gutter replacement
- Gutter repair
- Soffit and fascia
What Competitors Use
List of Services
-
X-FlangeList Item 1
Competitors often cut the bottom of the gutter and bend the tabs down. The tab is what they screw the downspout to. Over time the gutter tears and your downspout comes off causing water damage on your home.
-
Deck ScrewList Item 2
This is not strong enough to hold your gutters on in the winter when they are full of snow and ice. The screws will break causing the gutters to fall off the structure. But they sure are a cheaper way to install the gutters.
-
Other HangersList Item 3
Weaker hangers will open under weight and no longer be holding your gutters.
-
Box MiterList Item 4
A pre-fabbed corner. This creates 3 seams, and 3 times the probability of future leaks.
What WE Use
List of Services
-
Downspout OutletList Item 1
A separate piece inserted and screwed to the bottom of the gutter and sealed. This is much stronger and ensures the water goes into the downspout and doesn't leak. Some use outlets, but still don't seal them. WE DO.
-
#10 x 1 1/2" ScrewList Item 2
Used for attaching metal to wood. This is a proper gutter installation screw. The neoprene washer helps to keep any water from seeping through. Some use a #10 screw, but without a washer. We don't do this.
-
Raytec HangtiteList Item 3
We use the strongest hangers on the market, the Raytec Hangtite.
-
Strip MiterList Item 4
We cut our gutters at 45 degree angles at the corners and install a strip miter. One seam, as it should be.